Canon EOS C300 Mark II Camera Firmware for Mac OS

Sponsored Links:
Software Screenshot:
Canon EOS C300 Mark II Camera Firmware for Mac OS
Software Details:
Version: 1.0.2.1.00
Upload Date: 12 Feb 16
Developer: Canon
Distribution Type: Freeware
Downloads: 2
Size: 39576 Kb

Rating: 0.0/5 (Total Votes: 0)

Sponsored Links:

This package contains the files needed for installing Canon EOS C300 Mark II Camera Firmware 1.0.2.1.00. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

Firmware Version 1.0.2.1.00 incorporates the following correction and fixes:

- Corrects the size of the browser remote operation screen on an iOS device running iOS 9.
- Fixes a phenomenon in which the metadata of video clips recorded in RGB444 10 bit is displayed in 12 bit.
- Modifies the display when a signal to the GENLOCK terminal cannot be synchronized; the GENLOCK icon no longer disappears, but blinks instead.

IMPORTANT: Precautions for updating the firmware

- If the firmware update is not performed correctly, the camera may stop working.
- All camera settings will be reset formatted when you perform the firmware update.
- It is not possible to revert the firmware back to a previous version after you have performed the firmware update.
- Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source during the firmware update. Doing so may cause the camera to malfunction.

Installation Instructions:

- Save and unzip the downloadable archive.
- Insert the SD card into the camera’s SD card slot, and close the card cover.
- Slide the Power switch to CAMERA.
- After pressing the MENU button, open the [Initialize Media] submenu.
- Select [SD Card] and then press SET.
- Select [Complete] (complate initialization) and then press SET.
- When you select [OK] and then press SET, complete initialization of the SD card will start.
- When the confirmation message appears, press SET.
- Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
- Copy the firmware update data to the SD card
- Insert the SD card prepared into the camera’s SD card slot.
- Slide the Power switch to CAMERA.
- After pressing the MENU button, open the camera firmware submenu.
- [ System Setup] [Firmware] [Camera]
- The firmware update confirmation screen will be displayed.
- When you select [OK], the firmware update will start.
- After the update ends, the camera will restart automatically, and a firmware update completion screen will be displayed.
- When you select OK, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.
- Perform Step 2, and check that the firmware version has changed to [1.0.2.1.00].
- Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

Similar Software

Other Software of Developer Canon

Comments to Canon EOS C300 Mark II Camera Firmware for Mac OS

Comments not found
Add Comment
Turn on images!